Home > Surge Protector > 2 in 1 SPD BOSJK2/DC12

2 in 1 SPD BOSJK2/DC12

  • Video SPD BOS05B/JKM
  • Video SPD CoaxB/NM-F
  • Rs485 signal SPD BOS05YM2
  • DC12/AC24 Power SPD BOS12YM2
  • Audio / Tel SPD BOS110RJ11M2
  • Network RJ45 SPD BOS05RJ45M4
  • 2 in 1 SPD BOSJK2/DC12
  • 3 in 1 SPD BOSJK3/DC12
  • 4 / 8 chs video SPD CoaxJK/V4(V8)
  • Network & power 2 in 1 SPD RJ45/DC12

Product Abstract:

Video and Power protection; German brand core components; DC12V, AC24V, AC220V optional

Product Description


      BOSJK2/DC12 professional integrative multifunctional surge protector device. It is specially designed for
 surveillance control system. It can prevent the surge and static damage the camera power, video lines, the
 maximum discharge current can achieve 10KA, reacting within nanoseconds, so it can fully protect high-  
 levels and expensive surveillance equipments
  1. Adopt multilevel protection circuit, low-level persistent voltage.
  2. Adopt the famous German brand core components, installation and maintenance is easy.
  3. It has huge flow capacity, sensitive reaction.
  4. Excellent performance, and low-loss insert.
  Model   BOSJK2/DC12

Power protection parameters

  Nominal working voltage Un   DC12V
  Maximum working voltage Uc   DC15V
  Nominal flow-rate In (8/20uS)   5KA
  Maximum flow-rate Imax (8/20uS)   10KA
  Corresponsive time Ta   1nS
  Joint form   Press interface

Video signal protection parameters

  Continuous operating voltage Un   5V
  Maximum working voltage Uc   10V
  Nominal discharging current In (8/20us)   5KA
  Maximum discharging current Imax (8/20us)   10KA
  Insert loss Ae   0.2dB
  Response time Ta   1nS
  Joint form   BNC
  Dimension   63mm*52mm*40mm(does not include the joint and PE line)
  Working conditions   Temperature -25+65℃;Humidity95%25-30
  Test standard   IEC61643-21:2000
Installation and Maintenance:
  1.   First, link the power line with 4P socket (as the following picture), then plug in follow the arrow.
  2.   The BNC socket is the signal input, connect it to the signal line, the common outlet of BNC is the signal
         output, it connects the protected equipment. Do not connect in the opposite direction
  3.   Credibly connect the PE lines. This product need not pay special attention to maintenance, but please 
         waterproof notice. When the system working goes wrong, please check the surge protector after 
         removing it.If  unused thesurge protector condition,but the system working normal, meaning the surge
         protector is damaged, please change the surge protector.
The schematic diagram of installation:

Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:


Contact Us

  • Contact Person:

  • Tel:

  • Fax:

  • E-mail: