Home > Surge Protector > Audio / Tel SPD BOS110RJ11M2

Audio / Tel SPD BOS110RJ11M2

  • Video SPD BOS05B/JKM
  • Video SPD CoaxB/NM-F
  • Rs485 signal SPD BOS05YM2
  • DC12/AC24 Power SPD BOS12YM2
  • Audio / Tel SPD BOS110RJ11M2
  • Network RJ45 SPD BOS05RJ45M4
  • 2 in 1 SPD BOSJK2/DC12
  • 3 in 1 SPD BOSJK3/DC12
  • 4 / 8 chs video SPD CoaxJK/V4(V8)
  • Network & power 2 in 1 SPD RJ45/DC12

Product Abstract:

German brand core components; Multilevel protection circuit; Excellent performance

Product Description


       BOS110RJ11M2 lightning protection is applied to protect sensitive communication signal equitment; network 
 communication transmission lines; Widely used in China telecom, computer network transmission system, IP
 telephone, ADSL program-controlled switch, high-grade fax, telephone and other equipment; Make it from lightning
 induced voltage, power grid voltage fluctuation interference, electrostatic discharge and big load startup impact 
 surge voltage caused by major damage.
  1. Adopt multilevel protection circuit, low-level persistent voltage.
  2. Adopt the famous German brand core components, compact, the design is novel.
  3. It has huge flow capacity, sensitive reaction.
  4. Excellent performance, and low-loss insert.
  Model   BOS110RJ11M2
  Continuous operating voltage Un   5V
  Maximum working voltage Uc   10V
  Nominal discharging current In (8/20us)   5KA
  Maximum discharging current Imax (8/20us)   10KA
  Limit voltage Up   6V
  Data transmission rate Vs   100Mbps
  Insert loss Ae   0.2dB
  Response time Ta   1nS
  Joint form   RJ11
  Protection form   123-456
  Dimension   25mm*25mm*54mm(does not include the joint)
  Working conditions   Temperature -25+65℃;Humidity95%25-30
  Test standard   IEC61643-21:2000
Installation and Maintenance:
  1.   The video surge protector device should be linked between the signal line and the protected equipment.
  2.   "In" must be connect the signal line;"Out" must be connect the protected equipment, do not connect in the
         opposite direction.
 3.   The PE line of the lightning arrestor must strictly be connected to the lighting protection system at the
         equipotential, else, it will influence the working performance
  4.    This product need not pay special attention to maintenance, but please waterproof notice. When the system
          working goes wrong, please check the surge protector after removing it. If unused thesurge protector condition,
          but the system working normal, meaning the surge protector is damaged, please change the surge protector.
The schematic diagram of installation:

Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:


Contact Us

  • Contact Person:

  • Tel:

  • Fax:

  • E-mail: