Home > CCTV Tester > HD-2800 CCTV tester

HD-2800 CCTV tester

  • IPC-9600S CCTV Tester
  • STest-896 CCTV Tester
  • STest-895 CCTV Tester
  • STest-894 CCTV Tester
  • STest-893 CCTV Tester
  • HD-2800 CCTV tester
  • IPC-8600 / plus CCTV tester
  • IPC-4300  CCTV tester
  • IPC-3500 CCTV tester
  • HD-3000A AHD wrist CCTV tester
  • IPC-9800 CCTV tester
  • Borescope tester
  • IPC-9300 CCTV tester
  • New 5' HD screen wrist CCTV tester

Product Abstract:

3.5 inch LCD screen; Analog + HD AHD test CVI TVI optional

Product Description

1. 3.5inch screen display, 480(RGB)x320 resolution

2. Low power consumption, working time lasts 11 hours

3. LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust

4. CVI /TVI /AHD coaxial camera image display, coaxial PTZ control and call up the camera OSD menu 

5. Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive

    eight-system colorful images).

6. LED Flashlight.

7. HD coaxial control, PTZ control, color bar generator shortcut key.

8. F1, F2 user-defined key

9. Visual fault locator, to test fiber’s bending and breakage * (Optional)

10. Digital Multi-meter, DC and AC voltage measurement, Resistance measurement Continuity test, Diode measurements,

       Capacitance measurement * (Optional)

11. Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the    connected cable from

       messy cables. * (Optional)

12. Ping test, PING is the most conventional network debugging tools; it is used for testing if the connected IP camera or

       other network equipment's Ethernet port is working normally and the IP address is correct.

13. IP address scan The IP address scan can quickly search for connected IP cameras or another network device IP address

14. POE Voltage tests the PoE voltage from a PoE switch. The unit will clearly display the voltage for each wire in Ethernet cable.

15. Port Finder,it will enable the installer to easily and quickly find the connected port for an Ethernet cable.

16. Link monitor check if the new setting IP address is occupied.

17. TDR cable test, TDR break-point and short-circuit measurement. * (Optional)

18. PTZ control and PTZ protocol analysis

19. Cable test, Test LAN cable or telephone cable, UTP cable etc, cable type and the sequence of wires will be displayed

20. Support more than 30 protocols, such as Pelco-D, Pelco-P, SAMSUNG.

21. Support RS232/RS485,rate 600 ~ 115200bps adjustable

22. Built in Lithium Ion Polymer Battery(3.7V DC 3000mAh )

23. Image display and data control integration

24. Handheld HD coaxial tester, easy to carry and operation.

25. Optical power meter, test fiber loss and value * (Optional)


Model  HD coaxial tester HD-2800 series 【*】models are Optional
Video Test
Signal mode NTSC/PAL (Auto adapt)
Display 3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution
LCD adjustment Brightness, Contrast, Saturation adjustable
Video IN/OUT 1 channel BNC Input & 1 channel Output
Video Output Mode 1.0 Vp-p
Video Level test
Level test Video signals measured in IRE or mV (not for TVI,CVI ,AHD)
Video level meter (Optional)
Video Level meter PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement 
PTZ controller
Communication Support RS232 and RS485
PTZ Protocol Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.
Baud Rate 600,1200,2400,4800,9600,19200,57600,115200bps
Video signal generation
Color bar generator Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color )
UTP cable tester
UTP cable test Test UTP cable connection status and display in the screen. Read the number of the test box.
DC12V 1A power output
DC12V power output Output DC12V1A power for camera
Audio input test
Audio input test test the pickup and other audio equipments on the front-end
RS485 data analysis
Data Monitor Captures and analyzes the command data from controlling device
CVI test(Optional)*
CVI video signal test 1 channel CVI in(BNC interface)support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
TVI test(Optional)*
TVI video signal test 1 channel TVI in(BNC interface) support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable
AHD test(Optional)*
AHD video signal test 1 channel AHD in (BNC interface)support AHD 2.0 version, 720p 25/30fps,1080p 25/30fps,camera OSD menu control over coaxial cable
Port flicker
Port flicker Find the connected POE port quickly.
IP scan, Link monitor, PING test
IP scan Find out the connected IP camera or the other network equipment IP address quickly.
Link monitor Check the IP address whether is occupied
PING testing Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address
Cable scan (Optional) *
Cable scan Search the cable by the audio signal
PoE tester
PoE tester Display the power supply voltage and cable connection states
Digital Multimeter (Optional) *
AC/DC Voltage 0-660V auto/manual range, the min resolution is 0.1mV
AC/DC current 660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A
Resistance 660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ
Capacitance 6.6nf~66000uF, the min resolution is 1pf
Diode 0~2V forward voltage, the min resolution is 1mV
Data hold Hold and display the measured value
Relative measurement Display the relative power value
Continuity testing Built-in buzzer will sound, if resistance is lower than 50 Ω
Testing speed 3 times/ seconds
Data range -6600~+6600
Optical power meter (Optional) *
Calibrated Wavelength(nm) 850/1300/1310/1490/1550/1625nm
Power range(dBm) -70~+10dBm
Sensitivity(nW) 0.001nW
Connector type FC/PC
Data hold Hold and display the measured value

Relative measurement

Display the relative power value
Visual fault locator (Optional) *

Visual fault locator

Test fiber’s bending and breakage ( SM and MM fiber)
TDR Tester (Optional) *
TDR Tester breakpoint and short circuit measurement(BNC cable, telephone cable)
Power Adapter DC 5V(1.5A)
Battery Built-in 3.7V Lithium polymer battery ,3000mAh
Rechargeable After charging 3-4 hour, working time lasts 11 hours
Low Consumption Energy saving technology, the battery icon real-time display
Operation setting English/Chinese and other languages OSD menu
Auto off 5-60 (mins)
Keytone On/Off
Working Temperature -10℃ ~+50℃
Working Humidity 30%~ 90%
Dimension/Weight 194mm x 112mm x 48mm / 540g
Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:


Contact Us

  • Contact Person:

  • Tel:

  • Fax:

  • E-mail: