Home > Surge Protector > Network & power 2 in 1 SPD RJ45/DC12

Network & power 2 in 1 SPD RJ45/DC12

  • Video SPD BOS05B/JKM
  • Video SPD CoaxB/NM-F
  • Rs485 signal SPD BOS05YM2
  • DC12/AC24 Power SPD BOS12YM2
  • Audio / Tel SPD BOS110RJ11M2
  • Network RJ45 SPD BOS05RJ45M4
  • 2 in 1 SPD BOSJK2/DC12
  • 3 in 1 SPD BOSJK3/DC12
  • 4 / 8 chs video SPD CoaxJK/V4(V8)
  • Network & power 2 in 1 SPD RJ45/DC12

Product Abstract:

Network & power protection; German brand core components; Excellent performance; 12V or 15V optional

Product Description


      RJ45 / DC12 professional integrative network and power 2 in1 surge protector device.It is specially
 designed for surveilance system and network system. It can prevent the surge and static damage
 surveilance or network system and power. the maximum discharge current can achieve 10KA, reacting   
 within nanoseconds, so it can fully protect high-levels and expensive surveillance and network equipments
  1. Adopt multilevel protection circuit, low-level persistent voltage.
  2. Adopt the famous German brand core components, installation and maintenance is easy.
  3. It has huge flow capacity, sensitive reaction.
  4. Excellent performance, and low-loss insert.
  Model   RJ45/DC12

Power protection parameters

  Nominal working voltage Un   DC12V
  Maximum working voltage Uc   DC20V
  Nominal flow-rate In (8/20uS)   5KA
  Maximum flow-rate Imax (8/20uS)   10KA
  Corresponsive time Ta   1nS
  Joint form   Press interface

Network signal protection parameters

  Continuous operating voltage Un   5V
  Maximum working voltage Uc   6V
  Nominal discharging current In (8/20us)   5KA
  Maximum discharging current Imax (8/20us)   10KA
  Insert loss Ae   0.2dB
  Response time Ta   1nS
  Joint form   RJ45
  Dimension   108mm*66mm*29.5mm(does not include the joint and PE line)
  Working conditions   Temperature -25+65℃;Humidity95%25-30
  Test standard   IEC61643-21:2000
Installation and Maintenance:
  1.   First, link the power line with 4P socket (as the following picture), then plug in follow the arrow.
  2.   The RJ45 socket is the signal input, connect it to the signal line, the common outlet of RJ45 is the signal
         output, it connects the protected equipment. Do not connect in the opposite direction
  3.   Credibly connect the PE lines. This product need not pay special attention to maintenance, but please 
         waterproof notice. When the system working goes wrong, please check the surge protector after 
         removing it.If  unused thesurge protector condition,but the system working normal, meaning the surge
         protector is damaged, please change the surge protector.
The schematic diagram of installation:

Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:


Contact Us

  • Contact Person:

  • Tel:

  • Fax:

  • E-mail: